Weighing batching controller IND-300
Introduction
Weighing display controller (aluminum alloy shell)
Application
can be used for packing scales, proportion scales, screening scales, stabilization control devices for upper and lower limits control etc
1.1 Main characteristics
High precision, high resolution- △ -type A / D conversion, maximum A / D pulse number: 1,000,000.
Update rate is optional: 50 / s, 100 / s, 200 / s.
Internal anti-EMC interference circuit, anti-electromagnetic interference ability is strong, stable data, suitable for industrial field applications.
It has fault diagnosis functions such as sensor line breaking, reverse connection and signal overscale range.
Support zero point tracking and automatic zero return function.
Specific data filtering mode, weighing data is fast, stable, accurate, high resolution.
Dual network interface (can be used as a switch, support controller series), support PROFINET communication.
PROFINET Communications, provide the GSD file and Siemens PLC S7-200 and S7-1200 configuration instructions.
PROFINET Communication, support the upper machine for read and write, weight calibration, zero, peeling and other operations.
RS232 digital communication interface, support three continuous ways of output display weight.
20 mA current ring interface, support large screen communication.
Two switch inputs, three transistor output, and seven control modes.
Four-wire sensor input interface.
A 6-bit LED digital tube display.
304 stainless steel shell.
1.2 Technical parameters
Incentive voltage: 5.0VDC, which can drive 6 350 analog sensors.
Range signal range: 1.5 ~ 40 mV.
Zero-point signal range: -40~38.5mV.
Transistor contact capacity: 500 mA / 24VDC.
Full range temperature coefficient: 5 PPM / ℃.
Zero-point temperature drift: 0.06 uV / ℃.
Maximum sensitivity: 0.6 uV / d.
Nonlinearity: better than 0.01%FS.
Power supply voltage range: DC 1228V, the maximum power consumption of 6 watts. The controller needs good grounding wire, and can not share a power supply with the motor or heater equipment easy to produce power noise.
The temperature is-20℃ ~50℃, humidity is 10%~95%, no condensation.
Storage temperature is: -30℃ ~60℃, humidity is 10%~95%, no condensation.

